Skip to main content

CAMPUSonline flow-connector

flow-connector is an open source CAMPUSonline community project. You can use flow-connector to import all relevant data from your CAMPUSonline deployment.

Setup​

1. Get the artifact​

You can download the latest version form the community gitlab here. If you do not have access to the repository, please contact your Studo contact.

2. Install​

Use the coinst command to install the COnX application. Note the OIDC client secrets from Keycloak.

3. Create a new importer​

Under Configuration > Importers create a new importer of type CAMPUSonline flow-connector.

4. Configure the importer​

  1. Make sure the enabled checkbox is checked.
  2. keycloakRealm should be set to the same realm where the OIDC clients were created in Keycloak (usually CAMPUSonline_SP)
  3. Set the campusOnlineBaseUrl (example: https://online.fh-joanneum.at/JOANNEUMonline/co)
  4. campusOnlineApiSecret must be set to the client secret of the OIDC client created for flow-connector. The appropriate flow should be enabled in keycloak.

Debugging​

Usually the import logs (Configuration > Import Logs) should give you a good idea of what is happening. If you are stuck, contact your Studo technical contact.